1Scans
2Line up
3Check
4Result

← All toolsTools ← AlignmentAlign Lower jaw →

Check how the scans lined up

If a scan sits off, drag it into place or nudge it with the controls on the right, then measure. Fine-tune finishes the job from where you left it.

How the scans lined up

Nudge the wax-up

Drag the model, an arrow (moves along it) or the cube (turns it). Shift-drag or right-drag on the model turns it too. Arrow keys: 0.1 mm, Shift — 1 mm. Or drag a number below sideways, or click it to type.

Lines up within 50 µm—

Wax-up · moves

Prep · stays

Place by 3 points

Model

Tap a tooth: see its cross-section; tap another to switch
Double-click or double-tap: rotate around this point
Drag: rotate
One finger: rotate
Scroll wheel: zoom
Two fingers: zoom
Hover: millimetres under the cursor
1 2 3: both · wax-up · prep
Esc: clear selection

Your line

↑ ↓: move by 0.05 mm — with Shift by 0.25 mm

Cross-section

Drag the plane or the sliders: move the cross-section
↺ ↻: turn the plane
↑ ↓: tilt the plane
Shift + scroll wheel: move the cross-section without aiming at the plane
Right-drag on the drawing: left–right turns, up–down moves
← →: step 0.1 mm — with Shift 0.5 mm
Home: back to the middle of the tooth
X: cross-section in the other direction

Drawing

Tap: add a measurement — up to six at once
Drag a measurement’s end: move it
× next to the number: remove that measurement
⌫: remove the last one — with Shift all
Scroll wheel: zoom around the cursor
Two fingers: zoom
0: back to the whole tooth

up / down along the tooth0.0 mm

CT 1CT 2

This folder has more than one CT

Choose which one to open.

CT segmentation

Add a CT folder and get every tooth with its number, both jaws and the nerve canal in 3D. Takes about forty seconds.

Upper jaw scanOptional · STL, PLY or OBJ Replace

Lower jaw scanOptional · STL, PLY or OBJ Replace

No CT at hand? Open an example

The folder is read in your browser tab
The whole CT volume is sent for processing — no name, date or scanner — to Modal (EU); a very large one only down to the jaws and joints
Nothing is kept, unless you share a link or send us a scan that didn’t place — each lives 30 days
If you add jaw scans, they go to the same service to be placed on the CT — and aren’t kept either

along the arch —

Window

contrast brightness

See-through 65 %

View CT · no folder yet · —

Check the scans

Look from the side and from the top: a scan can look right from the front and still be flipped. Move it into place, or place it by points.

Drag a number sideways, or click it to type · Shift for bigger steps

Check the join

Slide between the two CTs: bone that jumps at the join means it’s off. Move it into place, or leave the field out.

Drag a number sideways, or click it to type · Shift for bigger steps

Fix the markup

Click a tooth on the model, or a piece from the list, then say what it really is.

See-through 65 %

Make your own case

Bite

Upper and lower scans. The bite is found on its own, with the contacts shown; the scanner's bite stays one tap away.

The scans are read in your browser. Signed in, the case is kept for you, without file names — privacy

no scans yet

00.10.20.3 mm

into the other jaw > 0.15 mm

Ceph from CT

A side view of the skull from the CT, true scale — landmarks, checked by you, and the numbers of your analysis.

The folder is read in your browser. Only the grey side view — no names, no dates — goes to Modal (EU) to place the landmarks; nothing is kept

Bone density0

Drag to turn. Midline points sit at the middle of the head; left (L) and right (R) points on the nearest bone along the ray — the depth across the head is a rule, not a measurement.

Window

contrast brightness —

Ceph from CT · no folder yet

All tools

Choose what you want to do.

Try a demo — no sign-in

Prep depth Bite CT segmentation View CT CT + scan

Sign in with Telegram

No password — Telegram knows who you are.

Coming later

BRAMA measures. The clinician decides. Privacy

Prep depth

Drop two scans — we’ll say what we’ll measure.

Your files stay on this computer unless you create a share link.

◐ 100 %

Line 1.00 mm

Camera

—

Tap a tooth to see its cross-section
Drag to rotate · Two fingers to zoom · Double-tap to set the rotation centre

Link to this case

R

L

Tap a tooth to see its cross-section

Turn planeTurn TiltTilt